Oct 12, 2026Buying Guides
Watch Oil and Oiler Stand Guide: Cups, Stands, and Pen Sets for Bench Service
Four-cup or five-cup, rotatable or fixed, die-cast or porcelain: oiler stands, pen sets, washing jars and oil bottles with the specs to identify your bench setup.
Precision watch lubrication requires strict control over fluid purity, volume, and placement. When oiling jewel bearings, pallet stones, cap jewels, and keyless works, airborne workshop dust or accidental cross-mixing of lubricant viscosities compromises rate stability. A dedicated oiling station keeps separate lubricants organized in covered wells and provides clean blotting zones to regulate droplet size. Selecting an oiler stand and pen assortment depends on your service repertoire—from standard four-fluid maintenance to complex five-fluid automatic and chronograph work across the Kocandy catalog.
Watch Oiler Stand and Cup Counts: Choosing Between 4-Cup and 5-Cup Setups
Selecting an oiling stand begins with the number of separate lubricants required during overhaul. Mechanical servicing avoids a single universal oil. Watchmakers deploy distinct lubricants across specific zones: low-viscosity synthetic oils for train wheel pivots, medium-viscosity oils for center wheels, synthetic grease for pallet fork stones, and high-pressure grease for keyless works.
A 4-cup layout covers standard four-fluid service protocols for manual-wind and simple automatic calibers, isolating train oils from heavier setting greases.
A 5-cup layout adds a fifth reservoir for specialized automatic reversing wheel lubricants or chronograph clutch grease. Color-differentiated wells and covers allow instant visual identification under bench lamps.
Rotatable vs Fixed Die-Cast Oiler Stands
The Kocandy catalog provides two heavy die-cast metal oiler sets supplied with matched dip pens. Both models combine aluminum alloy bases with ceramic cup components.
The rotatable 5-cup die-cast stand features a circular rotating turret on a weighted base. With a stated item weight of 475 g, the unit stays anchored during dipping. The rotating turret brings the selected lubricant directly to your hand without reaching over open wells. It includes five color-coded cups, individual dust covers, surrounding oil-absorbing sponge pads, and five matching dip pens.
The fixed 4-cup die-cast stand uses a stationary base plate weighing 420 g. It provides four color-coded cups with individual covers, absorbent blotting pads, and four matching dip pens.
Rotatable 5-cup die-cast stand with color-coded wells and five included dip pens.
Porcelain Dish Oiler Stands with Bench Grip Bases
For watchmakers who maintain their own fine oilers, the catalog provides dedicated die-cast stands fitted with porcelain ceramic dishes. These units do not include pens.
Model FWOS-RH-BG-0004 provides a 4-dish configuration in a die-cast alloy base with a sanded finish. Stated body dimensions are 87 mm (3.4 in) length, 50 mm (2 in) width, and 16 mm (0.6 in) height, with an item weight of 60 g (specifications also list length 10 cm and height 2 cm). It includes four separate porcelain containers, individual covers, a central replaceable felt pad, and a non-slip rubber base pad.
Model WT-OILER-RH-5CUPS-COLOUR provides a 5-dish configuration in a die-cast aluminum alloy base. Stated body dimensions are 117 mm (3.4 in / 4.6 in) length, 50 mm (2 in) width, and 17 mm (0.6 in) height, with an item weight of 80 g (specifications also list length 12 cm and height 2 cm). It includes five porcelain containers, individual covers, a central felt pad, and rubber base grip.
Glazed porcelain ceramic is non-porous and chemically inert, ensuring synthetic lubricants neither absorb into the wells nor cross-contaminate over years of service.
Model FWOS-RH-BG-0004 four-dish die-cast stand with white porcelain containers and lids.
Dust Covers and Oil Absorption Pads at the Oiling Station
Maintaining clean lubricants is vital for movement longevity. Airborne dust and metal filings settle quickly into open wells. Even microscopic debris introduced onto an escape wheel pivot alters rate consistency.
Every die-cast oiler stand in our catalog features individual covers on each cup or dish. Opening only the active well during lubrication shields unused reservoirs from workshop fallout.
Controlling droplet size is equally critical. Over-oiling causes capillary creep onto plates or hairsprings. The rotatable 5-cup and fixed 4-cup stands include absorbent pads beside each cup, while porcelain models feature a central replaceable felt pad. Lightly touching the oiler blade to the pad blots excess fluid, leaving only a calibrated droplet.
Oiler Pens and Tip Assortments for Controlled Lubrication
Movement lubrication requires matching oiler tip dimensions to jewel holes and friction points. A tip that is too wide floods the bearing setting, while an undersized tip fails to deposit adequate fluid.
Model RH00000213 is a compact plastic kit weighing 50 g with dimensions of 4 cm length, 3.5 cm diameter, and 2 cm height. The package contains four capped oil pin pens across four graduated sizes: super fine, fine, medium, and large. It is paired with a durable plastic oil cup featuring three depressions of different sizes to hold small amounts of oil. The cup is supplied in blue or yellow at random.
In comparison, the die-cast tool sets include dip pens matched to their cup counts: four pens with the fixed stand, and five pens with the rotatable stand. Super fine and fine pens serve cap jewels and pallet stones; medium pens lubricate train wheel jewels; large pens apply grease to keyless works.
Model RH00000213 oiler set with four capped oil pens and a three-depression plastic cup.
Pre-Oiling Movement Cleaning: 5-Layer Aluminium Washing Jar
Fresh lubricant must never be applied to uncleaned components. Depositing oil onto old gummy residue or abrasive metallic wear particles creates a grinding paste that rapidly erodes pivots.
The 5-layer aluminium alloy washing jar (catalog weight 345 g) provides a dedicated system for cleaning movement parts and stripping old oil. It features five interlocking tiers sealed by a top cover with an approximate diameter of 69 mm (2.7 in). Stated single jar dimensions are approximately 16 x 18 mm (2.76 x 0.71 in).
The stackable tiers accommodate cleaning liquids or oils, allowing the watchmaker to separate train wheels, balance parts, and screws during bath agitation.
Pair this jar with specialized cleaning supplies for movement maintenance during parts preparation. Once components are dry, secure the chassis firmly when holding the movement for oiling so the assembly remains stable while you apply calibrated droplets.
Five-layer aluminium alloy washing jar with sealed top cover and 69 mm diameter.
Bench Storage with the Anti-Scattering Glass Bottle
Bulk lubricant containers should not sit open on an active repair bench where tools can tip them. The anti-scattering glass bottle provides a sealed, stable vessel for storing working fluids and handling small parts.
Constructed from glass with a blue threaded cap, this bottle weighs 130 g, stands 45 mm (4.5 cm / 1.77 in) tall, and has a base diameter of 3.9 cm (1.54 in). It has a stated capacity of approximately 30 ml. In catalog records, it is stated for Moebius oil and purpose-built as an anti-diffusion container designed to stop liquid from evaporating.
The weighted glass base lowers the center of gravity to resist accidental tipping during bench work, while also holding small screws and parts during chemical immersion.
Oiler Stand and Accessory Reference Table
The table below summarizes the physical specifications, reservoir capacities, materials, and package contents across all seven oiling and cleaning products in the Kocandy catalog.
Product | Type | Cups/dishes | Dimensions | Material | Product link |
|---|---|---|---|---|---|
Rotatable 5-Cup Stand Set | Rotatable oiler stand with 5 dip pens | 5 color-coded cups | Weight 475 g; dimensions Confirm by message | Aluminium alloy, ceramic | |
Fixed 4-Cup Stand Set | Fixed-base oiler stand with 4 dip pens | 4 color-coded cups | Weight 420 g; dimensions Confirm by message | Aluminium alloy, ceramic | |
Model FWOS-RH-BG-0004 | Fixed bench oiler stand (no pens) | 4 porcelain dishes | 87 mm x 50 mm x 16 mm (specs list length 10 cm); weight 60 g | Die-cast alloy, porcelain | |
Model WT-OILER-RH-5CUPS-COLOUR | Fixed bench oiler stand (no pens) | 5 porcelain dishes | 117 mm x 50 mm x 17 mm (specs list length 12 cm); weight 80 g | Die-cast aluminium alloy, porcelain | |
Model RH00000213 Oiler Kit | Compact kit with 4 capped pens | 1 cup (3 depressions) | Diameter 3.5 cm, length 4 cm, height 2 cm; weight 50 g | Plastic | |
5-Layer Washing Jar | Movement parts washing jar | 5 stackable tiers | Cover diameter approx. 69 mm, single jar 16 x 18 mm; weight 345 g | Aluminium alloy | |
Anti-Scattering Glass Bottle | Sealed storage bottle (stated for Moebius oil) | 1 chamber (approx. 30 ml) | Height 45 mm (4.5 cm), diameter 3.9 cm; weight 130 g | Glass |
Matching Your Bench Workflow to the Right Oiler Setup
Use the workflow guide below to select the appropriate combination of stands, pens, and washing containers based on your service complexity and workshop space.
Bench level | Recommended setup | Reasoning |
|---|---|---|
Basic Adjustments & Hobbyist Bench | Model RH00000213 Oiler Kit (1 cup with 3 depressions, 4 pens) | Compact, portable plastic footprint providing four graduated pen tips for occasional balance lubrication and train servicing without occupying permanent bench space. |
Standard Mechanical Service (4 Lubricants) | Fixed 4-Cup Die-Cast Set OR Model FWOS-RH-BG-0004 Porcelain Stand | Provides four isolated, covered wells for train oil, gear oil, pallet fluid, and keyless grease; weighted die-cast base prevents tipping. |
Automatic & Complication Service (5 Lubricants) | Rotatable 5-Cup Die-Cast Set OR Model WT-OILER-RH-5CUPS-COLOUR Porcelain Stand | Fifth well isolates dedicated reversing wheel lubricant or chronograph clutch grease; rotatable base allows rapid tool indexing under magnification. |
Complete Overhaul & Cleaning Station | 5-Cup Stand Set + 5-Layer Washing Jar + Anti-Scattering Glass Bottle | Integrates pre-assembly tiered parts degreasing, sealed fluid storage, and multi-viscosity precision dipping for full movement restoration. |
How to Identify Your Oiler Setup Before Messaging Us
Before submitting an inquiry or ordering replacement equipment, assemble your exact bench requirements into a concise identifier string. When requesting assistance from our workshop support team, compile the following four data points:
- Stand Type: Specify whether you require a rotatable turret base, a fixed die-cast plate, an inert porcelain dish assembly, or a compact plastic cup.
- Cup Count: Confirm whether your servicing protocol requires four wells for basic movements or five wells for automatic and chronograph calibers.
- Pen Requirements: Indicate whether you need a complete set with included dip pens or a standalone stand without pens (such as FWOS-RH-BG-0004 or WT-OILER-RH-5CUPS-COLOUR).
- Catalog Model Number: If matching a specific unit, quote model FWOS-RH-BG-0004, WT-OILER-RH-5CUPS-COLOUR, or RH00000213 directly.
If workspace is constrained, compare your bench depth against the 87 mm length of FWOS-RH-BG-0004 or the 117 mm length of WT-OILER-RH-5CUPS-COLOUR before ordering.
Oiling Station Inquiries and Workshop Support
If you need help selecting an oiler stand, verifying package contents, or checking spare felt pad availability, contact our team through our contact page. We check customer inquiries directly against our catalog inventory and reply within one working day. If your required cup count, stand dimension, or tool configuration is not listed anywhere above, send your exact specifications anyway—we will check them against our workshop supplies.
Kocandy is an independent supplier of watchmaker tools and replacement parts. We are not affiliated with, authorised by, or a dealer for any watch brand or tool manufacturer, including Seiko, Rolex, Omega, Citizen, Breitling, Panerai, Hublot, ETA, Bergeon, Horotec, or Vetus. All references to specific calibers, movement styles, or lubricant brands such as Moebius indicate stated-for compatibility designations only.
